How to Make a QR Code for Your WiFi Password
A guest arrives, asks for the WiFi password, and you end up spelling out a 16-character string of random letters and numbers — twice, because they mistyped it the first time. There is a better way: turn the network name and password into a QR code. Your guest points their phone camera at it and joins instantly, with no typing and no mistakes. It takes under a minute to make, and you can print it once and use it for months.
What a WiFi QR code actually is
A QR code is just a pattern that stores a short piece of text. For WiFi, that text follows a standard format that phones understand:
WIFI:T:WPA;S:YourNetworkName;P:YourPassword;;
The pieces are simple: T is the security type (usually WPA or WPA2), S is the network name (SSID), and P is the password. When a phone scans the code, it reads those three fields and connects — the same as if the person had typed them by hand, only faster and without typos. Our QR Codes beginner’s guide explains the format in detail, including error correction and why short codes scan more reliably.
Method 1: Make it with the free QR Code Generator (fastest)
Our free QR Code Generator has a Wi-Fi content type built in, so the code is made for you in seconds. It runs entirely in your browser — your network name and password are never uploaded or stored anywhere — and there is no signup, no watermark and no expiry.
- Open the QR Code Generator and choose the Wi-Fi content type.
- Type your network name (SSID) exactly as it appears on your router — capitals, spaces and all.
- Type the WiFi password exactly as it is. Check for look-alike characters: a capital “I” and a lowercase “l”, or a zero and the letter “O”, are the classic mistakes.
- Select the security type. WPA/WPA2 is right for almost every home router; WPA3 if your router uses it. If your network is open (no password), choose “nopass”.
- Check the live preview, then download the PNG. It is high-resolution, so it stays sharp when printed.
Method 2: Share from an Android phone
If your WiFi is already saved on an Android phone (Android 10 or newer), the phone can show you a QR code without any tool at all. Open Settings, then Wi-Fi, tap the network you are connected to, and tap “Share” — your phone will ask for your PIN, fingerprint or face unlock, and a QR code appears on screen for a guest to scan.
This is the quickest method when you only need to share once, on the spot. The downside is that the code lives only on that phone’s screen — if you want a printed copy for the fridge or the guest room, use Method 1 and print the downloaded PNG.
Method 3: Share from an iPhone (nearby devices)
iPhones do not show a WiFi QR code in Settings, but they can share the password directly with another Apple device. On the guest’s iPhone, open Settings, then Wi-Fi, and tap your network name; a “Share Password” prompt appears on your iPhone — tap it to connect them.
This works well between Apple devices, but it does not help an Android guest, and it cannot be printed. For a code that works for every phone, use the generator in Method 1.
Where to put the printed code
A WiFi QR code is most useful when guests can find it without asking you. Put a small framed card on the guest-room bedside table, a copy on the fridge or coffee table, or — in a café, office or waiting room — on the counter or a table tent. In a holiday rental, add it to the welcome book or the wall by the door.
Print it at least 4 to 5 cm wide for hand-held scanning, and larger for anything read from across a room — a code scanned from one metre away should be about 10 cm wide. Keep the print clean and flat: a crumpled code scans badly, and a code behind glass can glare.
Security basics (read this before you share)
A WiFi QR code is a printed copy of your password, so treat it like one:
- Use a guest network. Most modern routers let you create a separate guest network with its own name and password. Share that one, not your main network. Guests get internet, but they cannot see your computers, printers or smart-home devices.
- Never encode your router admin password. The code should hold only the WiFi password — never the password you use to log into the router itself.
- Rotate the password when needed. If a code has been photographed by people you no longer want on the network, change the WiFi password and make a fresh code. Static codes cannot be edited after printing, so reprinting is the fix.
- Use WPA2 or WPA3. If your router still offers WEP or an open network, switch to WPA2 or WPA3 in the router settings — older security can be cracked in minutes.
Common problems — and what to do
- The code scans but the phone will not connect: The password in the code is wrong. Regenerate it, typing slowly and checking every capital and look-alike character against the router’s sticker.
- The network name has special characters: If your SSID or password contains a semicolon (;), colon (:), comma (,) or backslash (\), those characters need escaping in the WiFi format. The generator handles this for you.
- The code is too small or too faint: Print it larger, with dark modules on a white background. Light-on-dark “inverted” codes fail on many scanners.
- It worked on one phone but not another: Test with both an iPhone and an Android before printing a batch. Older Android phones need a QR scanner app; newer ones scan from the camera directly.
Tips for the best results
- Test the code before you print it. Scan it with two different phones, at the distance and lighting where guests will use it.
- Keep a spare copy. Save the downloaded PNG in a folder you can find — when the password changes, you only need to generate one new code and reprint.
- Label it clearly. A code with no explanation gets ignored. “Guest WiFi — scan to join” is enough.
Frequently asked questions
How do I make a QR code for my WiFi password?
Open the free QR Code Generator, choose Wi-Fi, enter your network name, password and security type (usually WPA/WPA2), and download the PNG. Guests scan it and join instantly — no typing.
Do guests need an app to scan a WiFi QR code?
No, not on modern phones. iPhones scan QR codes from the Camera app, and most Android phones do the same. Older Android phones may need a free QR scanner app.
Is it safe to put my WiFi password in a QR code?
For a guest network, yes — and you can rotate the password any time. Never encode your main private network password or your router admin password on a code strangers might photograph.
Can I print the WiFi QR code?
Yes. Download the high-resolution PNG and print it at least 4 to 5 cm wide for hand-held scanning, larger for posters. Keep dark modules on a white background with a clear margin, and test it with two phones before printing a batch.
The short answer
Make the code with the free QR Code Generator — choose Wi-Fi, type the network name and password, download the PNG — then print it where guests can see it. Use a guest network and reprint whenever the password changes.